Scavenger Hunt Game
- Identification of the product covered by this certificate:
Walkie Talkies Scavenger Hunt - Model T-388 (ASIN: B07TBBGHQY)
- Citation to each CPSC product safety regulation to which this product is being certified:
- US Consumer Product Safety Improvement Act of 2008 (CPSIA) – PASS
Ban on Total Lead Content in Excess of 100 ppm in Children’s Products (15 U.S.C. § 1278a)
- Lead in surface coatings and similar materials of children's products (16 CFR Part 1303)
- Lead in substrate materials of children's products (ASTM F 963-17 Section 4.3.5.2 Heavy Elements in Accessible Toy Substrate Materials ASTM F 963-17 Section 4.3.5.2 Heavy Elements in Accessible Toy Substrate Materials)
- Phthalates in children's toys and childcare articles (16 CFR Part 1307:)
- Sec.103 Tracking Labels for Children’s Products
- ASTM F963-17 Standard Consumer Safety Specification for Toy Safety - PASS
- Physical and Mechanical Properties
- Flammability
- Clause 4.3.5 Heavy elements – Total Lead content
- Clause 4.3.5 Heavy elements –Soluble Heavy Metals content
- CPSC 16 CFR 1501 – PASS
- Small parts
- CPSC 16 CFR 1500.48 - PASS
- Sharp points
- CPSC 16 CFR 1500.49 - PASS
- Sharp edges
As per Test report: WDX19010795EN dated Feb 14, 2019 extract (the original report is available upon request):
|
No. |
Test Sample |
Standard and Requirement |
Conclusion(s) |
|
1 |
Submitted sample |
ASTM F963-17 - Physical and Mechanical Properties |
PASS |
|
2 |
Submitted sample |
ASTM F963-17 - Flammability |
PASS |
|
3 |
Tested materials of submitted samples |
ASTM F963-17 Section 4.3.5.2 - Total Lead content in substrate material |
PASS |
|
4 |
Tested materials of submitted samples |
ASTM F963-17 Section 4.3.5.2 - Soluble Heavy Metals content in substrate material |
PASS |
|
5 |
Tested materials of submitted samples |
US Public Law 110-314 [Consumer Product Safety Improvement Act of 2008(CPSIA)] - Total Lead (Pb) in paint or surface coating |
PASS |
|
6 |
Tested materials of submitted samples |
US Public Law 110-314 [Consumer Product Safety Improvement Act of 2008(CPSIA)] - Total Lead (Pb) in accessible substrate materials |
PASS |
|
7 |
Tested materials of submitted samples |
US Public Law 110-314 [Consumer Product Safety Improvement Act of 2008(CPSIA)] - Phthalates |
PASS |
|
8 |
Tested materials of submitted samples |
CPSIA Tracking Labels for Children's Products: As specified in Consumer Product Safety Improvement Act (CPSIA) of 2008 Section 103 |
PASS |
Test Result(s):
Mechanical and Physical Properties - ASTM F963-17
|
Section |
Testing Items |
Assessment |
|
4 |
Safety requirements |
PASS |
|
4.1 |
Material quality |
PASS |
|
4.2 |
Flammability |
PASS |
|
4.6 |
Small objects |
PASS |
|
4.7 |
Accessible edges |
PASS |
|
4.9 |
Accessible points |
PASS |
|
4.34 |
Balls |
PASS |
|
5 |
Labeling Requirement |
PASS |
|
5.2 |
Age grading labeling |
PASS |
|
5.15 |
Battery operated toys |
PASS |
|
5.16 |
Promotional materials |
PASS |
|
6 |
Instructional Literature |
PASS |
|
6.1 |
Definition and description |
PASS |
|
7 |
Producer's Marking |
PASS |
|
7.1 |
Name of the producer or the distributor |
PASS |
|
Address of the producer or the distributor |
PASS |
Test Result(s):
The submitted samples were undergone the use and abuse tests in accordance with the Federal Hazardous
Substances Act (FHSA), Title 16, Code of Federal Regulations:
|
Testing Items |
FHSA |
Parameter |
|
Drop Test |
Section 1500.53(b) |
10x4.5 ft |
|
Torque Test |
Section 1500.53(e) |
4 in.lbf |
|
Tension Test |
Section 1500.53(f) |
15 lbf |
|
Compression Test |
Section 1500.53(g) |
30 lbf |
Flammability - ASTM F963-17 Annex A5
|
Sample |
Ignition Point |
Burn Length (inch) |
Burn Time (sec.) |
Burn Rate |
Limit (inch/sec.) |
Conclusion |
|
Wireless intercom |
5 |
0 |
0 |
0 |
0.10 |
PASS |
Soluble Heavy Metals content in substrate material - ASTM F963-17 Section 4.3.5.2
Method: ASTM F963-17 Section 8.3.2 to Section 8.3.5, analyzed by Inductively Coupled Plasma Atomic
Emission Spectroscopy (ICP-AES).
|
Elements |
As |
Ba |
Cd |
Cr |
Hg |
Pb |
Sb |
Se |
Conclusion |
|
Limit (mg/kg) |
25 |
1000 |
75 |
60 |
60 |
90 |
60 |
500 |
|
|
RL (mg/kg) |
2.5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
|
|
Material No. |
Result (mg/kg) |
||||||||
|
1 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
|
2 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
|
3 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
|
4 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
|
5 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
|
6 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
|
7 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
The Lead content of paint or surface coating - CPSIA
Method: CPSC-CH-E1003-09.1, analyzed by Atomic Absorption Spectroscopy (AAS) or Inductively Coupled
Plasma Atomic Emission Spectroscopy (ICP-AES).
|
Material No. |
Limit (mg/kg) |
RL( mg/kg) |
Result (mg/kg) |
Conclusion |
|
9 |
90 |
10 |
N.D. |
PASS |
|
Material No. |
Limit (mg/kg) |
RL( mg/kg) |
Result (mg/kg) |
Conclusion |
|
1+2 |
100 |
10 |
N.D. |
PASS |
|
3+4 |
100 |
10 |
N.D. |
PASS |
|
5+6+7 |
100 |
10 |
N.D. |
PASS |
|
8 |
100 |
10 |
N.D. |
PASS |
Test Result(s):
Phthalates - CPSIA
Method: CPSC-CH-C1001-09.4, analyzed by Gas Chromatograph-Mass Spectrometry (GC-MS).
|
Substances |
DBP |
BBP |
DEHP |
DINP |
DIBP |
DPENP |
DHEXP (DnHP) |
DCHP |
Conclusion |
||
|
CAS No. |
84-74-2 |
85-68-7 |
117-81-7 |
28553-12-0 |
84-69-5 |
131-18-0 |
84-75-3 |
84-61-7 |
|||
|
Limit (mg/kg) |
1000 |
1000 |
1000 |
1000 |
1000 |
1000 |
1000 |
1000 |
|||
|
RL (mg/kg) |
30 |
30 |
30 |
50 |
30 |
30 |
30 |
30 |
|||
|
Material No. |
Result (mg/kg) |
||||||||||
|
1+2 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
||
|
3+4 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
||
|
5+6+7 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
||
|
9 |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
N.D. |
PASS |
||
Note: 1. mg/kg = milligram per kilogram (ppm).
- D. = Not Detected (< RL).
- RL = Reporting Limit.
- "+" = This data is obtained from composite testing on more than one materials, it is possible that result obtained from individual testing on any one of the materials is substantially higher. Please be cautious when using this data for compliance evaluation.
- Children's toys and child care articles shall not more than 1000mg/kg DBP, BBP, DEHP, DIBP,
DPENP, DnHP or DCHP.
Children's toys defined as 12 years and under.
- Child care articles to facilitate sleep or feeding of children 3 years and under, or to help children with sucking and teething.
- Children's toy that can be placed in the mouth and child care articles shall not more than 1000mg/kg DINP.
- Toys that can be kept in the mouth by a child so that it can be sucked or chewed.
Toys or part of toy with one dimension less than 5cm
CPSIA Tracking Labels for Children's Products (Visual)
Method: As Specified in Consumer Product Safety Improvement Act (CPSIA) of 2008 Section 103
Tracking label on the product 1
|
Requirement |
Result |
|
Name of the manufacture or the name of the private labeler |
PASS |
|
Manufacture location, including the name of the city and country, or the name of other means of coding of city and state |
PASS |
|
Date of the production of the product, in a form of Month/ Year or any other coding system |
PASS |
|
The cohort information(including the batch, run number, or other identifying characteristic |
PASS |
|
Permanent remark |
PASS |
|
Conclusion |
PASS |
Tracking label on the packaging 1
|
Requirement |
Result |
|
Name of the manufacture or the name of the private labeler |
PASS |
|
Manufacture location, including the name of the city and country, or the name of other means of coding of city and state |
PASS |
|
Date of the production of the product, in a form of Month/ Year or any other coding system |
PASS |
|
The cohort information(including the batch, run number, or other identifying characteristic |
PASS |
|
Permanent remark |
PASS |
|
Conclusion |
PASS |
- Identification of the importer certifying compliance of the product:
Importer:
A Higher Perspective Consulting Corp.
Brand: TRENDY PRO
PH01 20 North Park Rd
Thornhill
ON
L4J0G7
(647) 985 6275
Manufacturer: hired to produce the product under TRENDY PRO Private label:
Shenzhen Hui Kei Electronics Co., LTD
Huike Ind Park Minying Ind Prk Shuitian Vill Shiyan St Bao'an Shenzhen, 518102 China
- Contact information for the individual maintaining records of test results:
Oxana Ungureanu, Owner
TRENDY PRO
A Higher Perspective Consulting Corp.
PH01 20 North Park Rd
Thornhill
ON
L4J0G7
(647) 985 6275
- Date and place where this product was manufactured:
Jan, 2019
Address: Huike Ind Park Minying Ind Prk Shuitian Vill Shiyan St Bao'an Shenzhen, 518102 China
- Date and place where this product was tested for compliance with the regulation(s) cited above:
No.221, Jianshebei Road, Huadu District, Guangzhou City, China
Testing completion Date: Feb. 14, 2019
Reference report No.: WDX19010795EN
Tel: +86-020 – 86890001 Fax: +86- 20- 86896998 http:// www.wdwonder.com E-mail: wd@wdwonder.com
- Identify the third party, CPSC-accepted where this product was tested by an accredited laboratory (accepted by the CPSC) for compliance with the regulation(s) cited above:
#1435 Guangdong Wonder(Guangzhou) Testing International Co., Ltd.
Guangdong Wonder Testing international CO.,LTD
No.221, Jianshebei Road, Huadu District, Guangzhou City, China
Tel: +86-020 – 86890001 Fax: +86- 20- 86896998 http:// www.wdwonder.com E-mail: wd@wdwonder.com
ISED Canada Certification for the Walkie Talkies:
ASIN: B07TBBGHQY
- Designed, Imported and Distributed by: A HIgher Perspective Consulting Corp under brand TRENDY PRO
- Manufacturer: Shenzhen Huike Electronics Co., Ltd.
- Manufacturer Address: Address: 2FA, Building 5, Hezhou Fishery Industrial Zone, Xixiang, Baoan District, Shenzhen, China
- Batch 0520WT, produced: Jan 2019
https://sms-sgs.ic.gc.ca/equipmentSearch/searchRadioEquipments?execution=e1s6&index=4